Do you have references for the equivalency of CIE inverse instrument geometries?

FAQ: “…. the schema of the principle of measuring shows other way of light (source of light -> sample -> sphere -> detector) than our ColorQuest (source of light -> sphere -> sample ->  detector). Please can you explain me difference between both construction? difference between both results of measuring?”

Continue reading

Can you explain the LabScan XE 0:45 inverted geometry?

FAQ: “Straight from the LSXE Pro-forma, the LabScan XE sample ports are described as:

Port Insert, 3-mm illuminated area; 5-mm measured area
Port Insert, 6-mm illuminated area; 10-mm measured area
Port Insert, 13-mm illuminated area; 17-mm measured area
Port Insert, 25-mm illuminated area; 30-mm measured area
Port Insert, 44-mm illuminated area; 50-mm measured area

I always thought that the measured area was smaller than the illuminated area. Have the illuminated/measured area in the Pro-forma been transposed? Seems like it!”

Continue reading

Directional Instruments

HunterLab Directional Instruments

HunterLab Directional Instruments

 

HunterLab manufactures bench top instruments with two different geometry types: directional 45/0 (or 0/45) and diffuse sphere instruments, as discussed in a previous blog note. A 45/0 directional instrument illuminates the sample at a 45˚ angle from the sample surface and the detector is located 0˚ in line perpendicular to the sample surface. The inverse, 0˚ illumination and detection at 45˚, can also be used and yields equivalent measurements. The MiniScan EZ and ColorFlex EZ instruments are 45/0 instruments and the LabScan XE is a 0/45 instrument. Continue reading